电压源型换流阀在绝缘型式试验下电场仿真计算
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国南方电网重点科技项目(GZHKJ 00000101)


Electric Field Simulation and Calculation of Voltage Sourced Converter Valve in Insulation Type Test
Author:
Affiliation:

Fund Project:

The Key Science and Technology Project of China Southern Power Grid (Research on Key Technologies and Demonstration Application of Flexible Coordinated Control of Electromagnetic Loop Network in Metropolitan Power Grid with High Load Density, Grant No. GZHKJ 00000101).

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    模块化多电平电压源型换流器作为柔性环网控制器和统一潮流控制器(UPFC)系统中的关键设备,其运行的可靠性直接影响到整个系统的安全稳定运行。文中以应用于柔性环网控制器及苏南500 kV UPFC工程的换流阀作为研究对象,采用PTC Creo 3D与Ansys混合建模技术,建立了换流阀塔的三维模型,详细计算了换流阀塔在绝缘型式试验下的电场分布。计算结果表明:换流阀塔对地空气间隙、层间空气间隙以及换流阀塔的外表面的空气介质等绝缘强度都能满足换流阀绝缘型式试验的要求,保证换流阀的安全可靠运行。

    Abstract:

    As the key equipment in the flexible looped network controller and UPFC,the reliability of the modular multilevel voltage sourced converter directly affects the safe and stable operation of the whole AC system.We established a 3-D model of the flexible looped network controller and Sunan 500 kV UPFC converter using PTC CREO and ANSYS.We calculated the electric field distribution of the converter valve in insulation type test.The results show that the insulation strength of the air gap distance to the ground of converter valve,the air gap between layers of converter valve,the air medium outside of converter valve can meet the requirements of the converter valve in insulation type test,which can ensure safe and reliable operation of the converter valve.

    参考文献
    相似文献
    引证文献
引用本文

张栋,欧阳有鹏,尚慧玉,赵宏伟,谢晔源,朱铭炼.电压源型换流阀在绝缘型式试验下电场仿真计算[J].电力工程技术,2017,36(2):76-81

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-01-04
  • 最后修改日期:2017-02-11
  • 录用日期:2017-02-20
  • 在线发布日期: 2017-05-27
  • 出版日期: